This product is mil-spec hard coat anodized and then coated
in Magpul FDE Cerakote. Sorry, we don't have primary product images of
it in this finish at this time.
The Patented Arisaka Inline Scout Mount is designed specifically for the Surefire Scout Light M600 and M300 series weapon lights, the Arisaka 300, 600 and 18650 Series Lights, Modlite OKW and PLH, Olight Odin, and the Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser).
It replaces the stock Picatinny rail adapter with a low profile mount
for M-Lok handguards. The mount is especially useful on handguards that
feature 45 degree angle mounting flats, such as the BCM MCMR, Geissele
Automatics SMR MK4, MK8 and MK16, Daniel Defense MFR, KAC URX4, ALG Defense EMR, MI Gen 3, Mega MML and Mega/Hodge Wedge Lock.
When used on a 45 degree angle mounting flat, the Inline Scout Mount
allows the user to position the light closer or farther away from the
top 12 o'clock rail to give clearance for front sights or other
accessories. Three positions are provided, allowing an offset of
0.12" to either side of center. The base of the Surefire Scout Light sits only 0.2" above the mounting surface.
Installation tip: In order to reduce the overall length of the mount
as much as possible, it is necessary to unscrew the tail cap of the
light to access the front-most mounting screw.
This mount is not intended for use in a cantilever fashion where it hangs off the end of the handguard.
Fit with front sights varies depending on mounting location on handguards with 45 degree flats:
1. Top left 45 degree flat: Most sights work, including MBUS Pro,
Knight's Armament Micro, Troy folding, and Diamondhead. MBUS Gen II work
if positioned to allow clearance for the release tab.
2. Top right 45 degree flat: Due to the asymmetrical body of the
Surefire Scout Light, placement of the front sight and light are more
critical in this setup. The smaller sights like MBUS Pro and Knight's
Armament Micro work fine, but the Troy, Diamondhead, and MBUS Gen II
will not be able to clear the main body where the screw holes reside for
the stock picatinny adapter. This means one or the other will have to
be moved forward/back to get appropriate clearance. Another option is to
use an Arisaka 300 Series Light Body or 600 Series Light Body, which will allow plenty of clearance.
Compatible with the Modlite PLH, PLHv2 and OKW, Surefire M300A,
M300B, M300C, M300V, M312, M322, M312V, M313V, M322V, M600B, M600C,
M600P, M600U, M600V, M600DF, M612, M622, M603V, M612V, M622V,
Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), Olight Odin, CD
REIN, and Arisaka 300, 600 and 18650 Series.
Length: 3.4"
Height: 0.20" (at Surefire Scout Light mounting point)
Weight: 0.6 oz
The mount is CNC machined from 7075-T651 aluminum and MIL-A-8625 Type III
hard coat anodized. Includes necessary screws to attach light body to
mount. Requires an IP20 TorxPlus driver for installation (not included).
A T9 Torx driver is required to remove the stock Picatinny mount from
Surefire Scout Lights. Recommended torque: 30 inch lbs for M-Lok screws and 20 inch lbs for light body screws with Loctite 222 or 243.
Hardware: Two M-Lok nuts, two 10-24x5/16" Torx button head screws, two 8-32x3/8" Torx flat head screws.
This product is covered by U.S. Patent No(s). 11385026 and other pending patents.
Made in the USA.
